#Brinks digital deadbolt code#

Enter your current Programming Code and then press the BRINKS button.

#Brinks digital deadbolt how to#

So hereвЂ™s how to change the Programming Code on a Brinks Digital Deadbolt: You should change the default code to ensure that only you can make changes to the lock programming. That is, to add/delete a User Code, enable auto-lock or reset the lock, you need to first enter the Programming Code. Your Brinks Digital Deadbolt comes with a 4-digit Programming Code that allows you to make changes to the lock programming.

How long do Brinks Digital Deadbolt batteries last?.

Brinks Digital Deadbolt Keeps Beeping and Flashing Red?.

Brinks Digital Deadbolt Problems and Troubleshooting.

How to Turn Off Brinks Keypad/Indicator Sound.

How to Lock/Unlock a Brinks Digital Deadbolt.

How to Enable/Disable Auto-Lock on a Brinks Digital Lock.

How to Create One Time User Code on a Brinks Electronic Deadbolt.

How to Add/Delete/Change User Codes on a Brinks Digital Deadbolt.

How to Change the Programming Code on a Brinks Digital Deadbolt.

How to Change the Programming Code on a Brinks Digital Deadbolt So letвЂ™s head over to the programming instructions. Now your lock can be operated electronically. YouвЂ™ll hear the lock motor run, followed by 2 beeps and 2 green flashes-to confirm that the process was successful.

Press 0 and then press the BRINKS button to complete the process.

Enter the default Programming Code (0000) and then Press the BRINKS button.

Note: If youвЂ™ve just installed the lock (first installation) or restored factory default settings, it wonвЂ™t work electronically until you вЂњDetect Left/Right-Hand Door InstallationвЂќ. Image adapted from Brinks Digital Deadbolt Manual. LetвЂ™s get right into it!ДЇirst off, see the image below for keypad/buttons functions-if youвЂ™re not familiar with them. In the next few paragraphs, IвЂ™ll walk you through the steps to add/delete User Codes on your Brinks lock, change the Programming Code, reset factory settings, and more. Then, take your old toothbrush and scrub the various parts of the deadbolt lock.Looking to program a new/existing Brinks Digital Deadbolt? This post is your go resource!

Take your canned air and blow away any dirt and dust that may have accumulated inside the cylinders or locking assembly. Separate the two cylinders from the inside and outside of the door by pulling them straight out. To do this, simply remove the set screws on the inner cylinder of the door. If a new key didn't fix the problem, you'll need to disassemble the deadbolt lock and check to make sure that there is no dirt, dust, or grime inside the cylinders, key plug, or locking mechanism. Step 3 - Clean and Lubricate the Deadbolt Lock If you are still having difficulty locking and unlocking the deadbolt lock, continue on to the next step. Try a new key for the deadbolt lock or a spare that you may have. Over time, the key to your deadbolt lock will become worn and no longer be able to push up pins and tumblers in order to turn the lock plug inside the cylinder. If this is not the problem, continue on to step two. Take your screwdriver and make sure that the set screws are tightened securely. Many times, set screws may become loose in the deadbolt lock which will result in the locking mechanism moving slightly out of alignment. First, grasp the inner and outer cylinders of the deadbolt lock and see if they move slightly or wobble.